End fittings that look similar may use different threads or sealing seats. Hose bend radius, abrasion and movement also affect service life. Pressure equipment must be safely isolated and depressurized before inspection or removal.
Practical checks
- Record the hose marking, length, bore and both end connections.
- Identify the sealing form and fitting orientation, not only thread size.
- Check pressure rating, fluid compatibility, temperature and impulse duty.
- Record routing, bend radius, movement and abrasion protection.
Record the finding against the actual part, machine or drawing revision. A useful check identifies both the observation and the conditions under which it was made, so another person can review it.
Common mistakes to avoid
- Never check a suspected high-pressure leak with a hand.
- Do not mix hose and coupling systems unless the manufacturer approves the combination.
What to collect before a review
- Legible hose markings
- Photographs of both disconnected ends taken safely
- Pressure, fluid and routing details
Send clear original files where available. Mark uncertain dimensions, missing information and the result you need. Separate confirmed requirements from assumptions instead of filling the gaps with guessed specifications.
The next decision
Have the assembly made and verified through an appropriate rated hose system. Installation and testing must follow the equipment procedure; a visual match is not an acceptance test.
Discuss this requirement
Crecer Grande can review the information you already have and confirm the feasible scope, evidence needed and commercial next step.
Send your requirement → Browse the libraryGeneral engineering guidance; equipment instructions and the applicable drawing or specification govern the actual work.