Complete cooling systems matched to the laser — not selected by cabinet size alone.
For fiber-laser systems, the laser-source and optics/head circuits can have different cooling requirements. Start from the laser OEM cooling specification, actual power class and site electrical supply.
Classify the cooling requirement in under a minute.
This tool does not claim a final model selection. It prepares the engineering information CG needs to confirm the correct chiller.
Enter the laser and cooling information.
The result will tell you which technical data should be checked before CG quotes a replacement or new chiller.
- Laser source power is only the starting point.
- Verify required flow, pressure and temperature range from the laser OEM.
- Verify optics/head circuit and condensation-control requirements.
- Verify electrical supply and ambient installation conditions.
Search known chiller families or send the existing nameplate.
TEYU / S&A CWFL references are useful for search and requirement comparison. Hanli and Tongfei / TONFY can also be identified from the actual model label.
Laser chiller references
Use known model names as a search aid. Final selection follows laser-source and optics/head cooling data, electrical supply and actual site conditions.
Replacing an existing chiller?
You do not need to know the exact commercial name. Send the available evidence and CG can structure the compatibility check before quotation.
Upload / send requirement →- Full chiller nameplate/model
- Laser source make/model and rated power
- Cutting/welding/cleaning head model
- Supply voltage / phase / frequency
- Existing inlet/outlet sizes
- Water-flow / pump / alarm information if available
- Photos of existing installation